Architectural Ropes
With our wide range of wire ropes, terminations and accessories we can offer solutions to almost every architectural challenge. Ropes are available in 1×19, 7×7 and 7×19 constructions in diameters up to 28 mm, all in AISI 316 stainless steel — a marine-grade alloy whose 2–3% molybdenum content resists chloride corrosion through the composition of the material itself, not a surface treatment that degrades over time.
Clevises, swaged terminals, threaded fittings and spliced eyes cover the full range of connection details, and components are pre-tensioned and load-tested at our factory for precise installation on site. Our engineers support the project from preliminary dimensioning through to on-site adjustment and measurement.
Stranded Wires, Wire Ropes, Rods
Our range comprises stainless steel cables in diameters from 0.62 mm up to 26 mm in various configurations:
- Single-strand constructions: 1 × 7, 1 × 19, 1 × 37
- Wire ropes with wire core: 6 × 7 + WC, 6 × 19 + WC, 6 × 36 + WC
- Wire ropes with fiber core: 6 × 36 + FC, 8 × 7 + FC
- We manufacture inox rods in diameters from 5.3 to 21.9 with optional external threads and wrench flats.
External and internal threads
Wire ropes and rods can be assembled with thread ends in different designs and configurations, including:
- Standard external and internal thread ends, swaged
- Vissline external thread ends
- Univiss Plus external thread ends
- External and internal thread for on-site assembly
End Stops and Fittings
End stops in different configurations help to attach wire ropes to posts:
- Radius/Countersunk head ends
- Clamp rings
- Post fittings
- Variball system
Turnbuckles, Clevis Ends and Eye Ends
Cable and tie rod assemblies need a tensioning device on at least one end. If this is not possible, we can supply a range of turnbuckles that can be inserted between the ends.
Clevis and eye ends can be attached to cable assemblies to attach them to eye brackets or other anchoring.
Our Forte program consists of external threads, turnbuckles and elegantly designed clevises for heavy loads.
Attachments
We supply a range of hardware to attach wire rope assemblies to walls, posts or other structures.
Loops
- Swaged loops with thimbles or threads
- Loop clamps
Wire Rope Assemblies and Loops
- Different assembly lengths
- With internal or external threads
Wire ropes are assembled in lengths or delivered in bulk according to customer needs.
Rope clamps
Rope clamps attach intersecting wire ropes to each other. They increase the stability of wire rope figures. We supply clamps for up to three ropes.
Clamps can also be used to attach suspension ropes to posts and other supports.
